Difference between revisions of "Requesting Open Ports on the JHU Firewall"

Line 20: Line 20:
 
<br>
 
<br>
  
=== Alternative (Older) Method If Unable To Use Above Method===
+
=== Alternative (Older) Method If Unable To Use Above Method (Link Not Working, Etc.===
  
 
All port opening/closing requests should be sent ''by the requester'' to  
 
All port opening/closing requests should be sent ''by the requester'' to  

Revision as of 16:39, 11 October 2016

INTRO

CS does not have a network firewall in place, but JHU has a perimeter firewall in place between the Internet and JHU.

If you need a port open on the JHU Firewall, you need to request it from JHU.


Requesting JHU to Open a Firewall Port

New, Official Method

Please see:

http://it.jhu.edu/security/Public_IP_Addressing_NEW

for instructions to request port openings through the JHU Firewall.

All questions and follow-up regarding these instructions need to be addressed to JHU Networking or JHU Network Security. The JHU Helpdesk at 410-516-HELP may be able to direct your questions to the correct team.


Alternative (Older) Method If Unable To Use Above Method (Link Not Working, Etc.

All port opening/closing requests should be sent by the requester to network.security@jhmi.edu as JHU's Network Security team is responsible for the JHU perimeter firewall. You will have to provide:

a) your system's full hostname (including the domain part) and IP address.
and
b) specific reasons as to the need of each of your port openings.
and
c) allow JHU to run security scans on any equipment for which you request port openings.

All questions and follow-up regarding these instructions need to be addressed to network.security@jhmi.edu