Difference between revisions of "Connecting to the CS Ugrad Net"

Line 11: Line 11:
 
<br>
 
<br>
  
==Obtaining a ''DHCP'' IP Address==
+
==Obtaining a ''DHCP IP'' Address==
  
 
# Set your computer to use DHCP.
 
# Set your computer to use DHCP.

Revision as of 20:29, 10 March 2017

Since CS does not maintain wireless connections, if you will not be connecting to JHU's hopkins wireless system, then, you will need to use a CAT-5 or CAT-6 cable for your network connection.

DHCP service with dynamic IP addresses on the CS Ugrad Net is available from:

  • the table-mounted and wall-based network ports within the Malone 122 Undergraduate computer lab
  • The wallports on the Undergraduate Computer lab side of MH G61.

Static IP addresses are not available on the ugrad net.


Obtaining a DHCP IP Address

  1. Set your computer to use DHCP.
  2. Plug your computer into a tabletop or wall-based network jack in MH 122.
    • Depending on your operating system, you may have to reboot your computer at this point.
  3. You now have a dynamically-assigned IP address on the CS Grad/Research Net.
NOTE: Sometime in the future, we will be using a different method for providing a dynamically-assigned IP, but for now, the procedure above works.)