Difference between revisions of "Connecting to the CS Ugrad Net"
Line 18: Line 18:
 
# Plug your computer into a tabletop or wall-based network jack in ''MH 122'' or a wall-based jack in the ''Ugrad side of MH G61''.
 
# Plug your computer into a tabletop or wall-based network jack in ''MH 122'' or a wall-based jack in the ''Ugrad side of MH G61''.
  
−
* Depending on your operating system, you may have to reboot your computer at this point.
+
# Depending on your operating system, you may have to reboot your computer at this point.
 +
 
 
# You now have a dynamically-assigned IP address on the CS Underground Net.
 
# You now have a dynamically-assigned IP address on the CS Underground Net.
  

Revision as of 20:42, 10 March 2017

Since CS does not maintain wireless connections, if you will not be connecting to JHU's hopkins wireless system, then, you will need to use a CAT-5 or CAT-6 cable for your network connection to connect to the CS Undergrad Net.


DHCP service with dynamic IP addresses on the CS Ugrad Net is available from:

  • the table-mounted and wall-based network ports within the Malone 122 Undergraduate computer lab
  • The wallports on the Undergraduate Computer lab side of MH G61.

Static IP addresses are not available on the CS Ugrad Net.


Obtaining a DHCP IP Address on the CS Undergrad Net

  1. Set your computer to use DHCP.
  1. Plug your computer into a tabletop or wall-based network jack in MH 122 or a wall-based jack in the Ugrad side of MH G61.
  1. Depending on your operating system, you may have to reboot your computer at this point.
  1. You now have a dynamically-assigned IP address on the CS Underground Net.
NOTE: Sometime in the future, we will be using a different method for providing a dynamically-assigned IP, but for now, the procedure above works.)