Resetting a CS Lab Printer That Hangs

Revision as of 17:47, 4 October 2017 by Steve410.cs.jhu.edu (talk | contribs) (Created page with "CS Labs MH 122 and MH G-61 each house an HP LaaserJet 4350 printer. Per the [https://support.cs.jhu.edu/wiki/Available_Printers available printers list]: MH-122's printer is...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

CS Labs MH 122 and MH G-61 each house an HP LaaserJet 4350 printer.

Per the available printers list:

MH-122's printer is called mh122prt

and

MH G-61's printer is called mhg61prt

If you notice either of these printers are hung up (not related to a printer jam), it could be an incompatible document or a document that triggers an error 49.4C02 or something similar might have occurred.

Generally, to unhang these printers, try the following steps:

  • Power off the printer with the powerswitch on the right side of the printer.
  • Wait 1 minute. (Helps the internal memory clear out.)
  • Power the printer back on and wait until the screen shows Ready

If the printer still doesn't work, please email support@cs.jhu.edu with a full description of the problem (including which CS Lab room # the printer resides in.